How To – Softopper – Truck Tops, SUV Tops, Accessories

How To Measure Bed Length

Karli Morrison — Mon, 07 Oct 2024 22:59:13 +0000

Before ordering your Softopper®, it’s important to make sure you have the correct truck bed length to ensure the best fit. Measuring your bed before placing your order is a simple step that ensures your Softopper® will be a perfect match for your vehicle. Taking the time to measure beforehand helps avoid any sizing issues, so you can enjoy your new setup without any hassle!

Make it easy, Watch our video!

Step by step instructions

1. Gather your Tools

Measuring tape: a flexible measuring tape that can reach the full length of your bed
Notebook and pen: to record your measurements

2. prepare your truck bed

Clear the bed: Remove any cargo, tools or accessories from the truck bed
Ensure the tailgate is closed: the tailgate should be fully closed and latched.

3. take the measurement

Locate the front of the bed: Stand at the back of your truck, facing the cab. The front of the bed is the wall that separates the cab from the truck bed.
Measure from the inside: Place the end of your measuring tape at the top against the inside of the front wall of the truck bed.
Extend to the tailgate: Carefully extend the measuring tape from the front or bulkhead of the truck bed until it reaches the inside of the tailgate.
Read and record: Read the measurement at the point where the tape touches the inside of the tailgate. Record this measurement in inches. This is the length of your truck bed.

Important Considerations

Measure twice: it’s always a good idea to double-check your measurement to ensure accuracy.
Measure at the top: Make sure you are taking your measurement from the top of the inside of the front wall to the top of the inside of the tailgate. Taking measurements along the bottom of the bed will skew your measurement.
Consult our website: refer to our website or contact our customer support team if you have any questions about measuring or choosing the right size Softopper for your truck.

Key Points to emphasize

Inside measurement: its crucial to measure from the inside of the front wall to the inside of the tailgate.
Tailgate closed: the tailgate must be fully closed and latched when measuring.
Accuracy matters: an accurate measurement is essential for a proper fit and optimal performance of your Softopper®.

By following these simple steps, you can confidently measure your truck bed and ensure you order the right Softopper® for a perfect fit and enjoyable outdoor adventures.

If you have additional questions, contact our customer service team!

*Please note: shipping charges will apply for returns due to incorrect bed length measurements*

PHONE: 1-800-810-7227

EMAIL: Info@softopper.com

Tips N’ Tricks: How to Install Your Softopper Camper Top Tent!

Noah Kuchenrither — Mon, 06 May 2024 22:53:02 +0000

Own a Softopper and crave more leg room when you camp out in your truck bed? We have the solution for you! Our Camper Top Tent gives you the added space for both mid-size and large-size trucks. Installation is a breeze and should take roughly 10 minutes after first installation. You gain roughly an additional foot!

Other features and benefits?

Turn that truck bed into an instant campsite with the tailgate down.

Beige roof, blue walls

Bungie cords included

Custom Softopper exclusive awning poles and recycled material carying case included

Mildew resistant

Flame resistant

Water repellant

Noseeum insect screen

Heavy-duty fabric

Two-way zippers

Carrying bag

Check out our installation video here:

Installing the Softopper® 3rd Brake Light!

Noah Kuchenrither — Thu, 11 Apr 2024 20:55:33 +0000

Integrate our 3^rd Brake Light into your Softopper set-up without any alterations to the fabric. The 3rd Brake Light is universal and will fit all vehicle year, make, and models.

Features:

Light easily attaches to your Softopper fabric
Illuminates only when vehicle brake is applied
Includes 29ft of wiring
Quick disconnect to allow for easy removal of your Softopper

Recommended professional wiring installation.

Additional parts may be required for installation.

Get it today!: https://softopper.com/products/3rd-brake-light-universal/

Tips N’ Tricks: Safari Mode

Noah Kuchenrither — Fri, 26 Jan 2024 17:15:41 +0000

In our latest Tips N’ Tricks video, Russ will show you how to put your Softopper in Safari Mode! Learn how to correctly roll up your top and secure it, not only giving you additional access to your bed, but also giving your truck a whole new look! Best part… you can do this solo but it’s always more fun with a friend!

Love how your top looks in Safari Mode? Submit your photos on our Top Builds page here https://softopper.com/top-builds/ and check out our Safari Mode inspired merch https://softopper.com/merch/

Softopper Care Guide

Noah Kuchenrither — Mon, 04 Dec 2023 00:00:48 +0000

Hey there, Softopper enthusiasts! If you’re all about that open-road freedom and the wind in your hair, you probably understand the importance of keeping your beloved Softopper in tip-top shape. Whether you’re cruising through rugged terrains or soaking up the sun on a coastal drive, maintaining your soft top is key to ensuring it lasts through all your wild escapades.

So buckle up, because in this article, we’re diving into some simple yet effective care tips to help you keep your Softopper looking slick and performing like a champ. Let’s make sure your ride stays ready for whatever adventures come your way!

FAQ for cleaning your softopper

HOW DO I CARE FOR MY CANOPY?

For general cleaning of the canopy you can mix 1 part water with 1 part laundry detergent to get and the grime off of your Softopper.

Do I need to put any conditioner or protectant on my top?

There is no need to put any sort of conditioner on the outside of your Softopper. The vinyl coating on the material is designed to keep out all weather including rain, snow, and sun. It is also UV treated and will be protected in the harsh sunlight.

HOW DO I CARE FOR MY WINDOWS?

Rinse off all debris so as not to scratch the vinyl. Use a mix of a very light soap (such as Dawn dish soap l) and water spray, clean with a microfiber cloth, rinse with water, and then dry with a microfiber cloth. Applying this process regularly (before the product gets to a point where it needs to be restored) is the best preventative measure to ensure longevity and clarity. Any product containing chemicals will provide immediate cleanliness but will break down the vinyl over time. Never wipe the windows when they are dry.

Can I take my Softopper through a car wash?

You can go through a car wash as long as it is touchless. We would recommend that you rinse any residual waxes or cleaning agents off of the windows after going through the car wash. Any cleaning agents containing alcohol, silicone or wax will degrade the Softopper windows over time.

Replacement parts

If your Softopper ever needs a refresh, be sure to check out the replacement parts section on our website. If you don’t see the part you are looking for there, reach out to our customer service team at 1-800-810-7227 or at info@softopper.com and they can get you any part you need.

Will a Softopper handle snow?

Yes, our Softopper’s can handle snow on top of them! We suggest that if more than 12″ of light snow has accumulated to sweep it off.

Solid panel option

The Solid Panel add-on is a fantastic choice for the chilly winter months, giving you extra warmth and protection from the elements. So, if you’re planning some frosty adventures, the Solid Panel has got your back!

Dedicating time to regular maintenance and thoughtful care not only enhances the longevity and performance of your Softopper but also ensures a continued stylish and reliable experience on the road.